- 74 -
BIOS Setup
Parameter
Description
Memory Addressing
(continued)
Memory interleaving size
– Controls the memory interleaving size. This determines the starting
address of the interleave (bit 8, 9, 10 or 11).
– Options available: Auto, 256Bytes, 512Bytes, 1KB, 2KB. Default
setting is
Auto
.
1TB remap
– Enable/Disable to remap DRAM out of the space just below the 1TB
boundary. The ability to remap depends on DRAM configuration,
NPS, and interleaving selection, and may not always be possible.
– Options available: Auto, Do not remap, Attempt to remap. Default
setting is
Auto
.
DRAM map inversion
– Enable/Disable the DRAM map inversion function.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
ACPI
Press [Enter] for configuration of advanced items.
ACPI SRAT L3 Cache As NUMA Domain
– Enable/Disable report each L3 cache as a NUMA Domain to the
OS.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
ACPI SLIT Distance Control
– Determines how the SLIT distances are declared.
– Options available: Auto, Manual. Default setting is
Auto
.
ACPI SLIT remote relative distance
– Sets the remote socket distance for 2P systems as near (2.8) or far
(3.2).
– Options available: Auto, Near, Far. Default setting is
Auto
.
Link
Press [Enter] for configuration of advanced items.
GMI encryption control
– Enable/Disable GMI link encryption.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
xGMI encryption control
– Enable/Disable xGMI link encryption.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
CAKE CRC perf bounds Control
– Options available: Auto, Manual. Default setting is
Auto
.
4-link xGMI max speed
–
Specifies the max speed of 4-link xGMI. Default setting is
Auto
.
3-link xGMI max speed
–
Specifies the max speed of 3-link xGMI. Default setting is
Auto
.
xGMI TXEQ Mode
–
Configures xGMI TXEQ/RX vetting Mode.
– Options available: Auto, TXEQ_Disabled, TXEQ_Lane, TXEQ_Link,
TXEQ_RX_Vet. Default setting is
Auto
.
Summary of Contents for W771-Z00
