manualshive.com logo in svg

Gigabyte W771-Z00, User Manual

Share
Download
Gigabyte W771-Z00 User Manual Download Page 57

- 57 -

BIOS Setup

5-2-9 

Network Stack Configuration

(Note)  This item appears when 

Network Stack

 is set to 

Enabled

.

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Ipv4 PXE Support

(Note)

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Ipv4 HTTP Support

(Note)

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Ipv6 PXE Support

(Note)

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Ipv6 HTTP Support

(Note)

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

PXE boot wait time

(Note)

Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

(Note)

Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.

Summary of Contents for W771-Z00














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands