Gigabyte W480M VISION W User Manual Download Page 29

Page: 29 / 52

Advanced Voltage Settings

Advanced Power Settings

CPU Vcore Loadline Calibration

Allows you to configure Load-Line Calibration for the CPU Vcore voltage. Selecting a higher level keeps

the CPU Vcore voltage more consistent with what is set in BIOS under heavy load.

Auto

lets the BIOS

automatically configure this setting and sets the voltage following Intel's specifications. (Default: Auto)

CPU Vcore Protection

Allows you to set the over-current protection level for the CPU Vcore voltage. The adjustable range is

from 150.0mV to 400.0mV.

Auto

lets the BIOS automatically configure this setting. (Default: Auto)

VAXG Protection

Allows you to set the over-current protection level for the CPU VAXG voltage. The adjustable range is

from 150.0mV to 400.0mV.

Auto

lets the BIOS automatically configure this setting. (Default: Auto)

CPU Vcore Current Protection

Allows you to set the over-current protection level for the CPU Vcore voltage.

Auto

Lets the BIOS automatically configure this setting. (Default)

Standard~Extreme

Selects Standard, Low, Medium, High, Turbo, or Extreme which represents

different level of over-current protection for the CPU Vcore voltage.

CPU Vcore PWM Switch Rate

Allows you to set the PWM frequency for the CPU Vcore voltage. The adjustable range is from 300.0KHz

to 500.0KHz. (Default: Auto)

VAXG PWM Switch Rate

Allows you to set the PWM frequency for the CPU VAXG voltage. The adjustable range is from 300.0KHz

to 500.0KHz. (Default: Auto)

CPU Core Voltage Control

This section provides CPU voltage control options.

Chipset Voltage Control

This section provides Chipset voltage control options.

DRAM Voltage Control

This section provides memory voltage control options.

Internal VR Control

This section provides VR voltage control options.

PC Health Status

Reset Case Open Status

Disabled

Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled

Clears the record of previous chassis intrusion status and the

Case Open

field will

show "No" at next boot.

Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To

clear the chassis intrusion status record, set

Reset Case Open Status

Enabled

, save the settings to

the CMOS, and then restart your system.

CPU Vcore/CPU VCCSA/DRAM Channel A/B V3.3V/ +5V/+12V/CPU VAXG

Displays the current system voltages.

- 29 -

Summary of Contents for W480M VISION W





















































Search results

Summary of Contents for W480M VISION W

Reviews:

Related manuals for W480M VISION W

Brands by name

Popular brands

Gigabyte W480M VISION W, User Manual

Search results

Summary of Contents for W480M VISION W

Reviews:

Related manuals for W480M VISION W

Brands by name

Popular brands