Gigabyte TRX40 DESIGNARE User Manual Download | Manualshive

Page: 71 / 112

background image

- 71 -

Unique Features

Chapter 5 Unique Features

Because BIOS flashing is potentially risky, please do it with caution. Inadequate BIOS flashing may

result in system malfunction.

5-1-1 Updating the BIOS with the Q-Flash Utility

A. Before You Begin

1.

From GIGABYTE's website, download the latest compressed BIOS update file that matches your motherboard

model.

2.

Extract the file and save the new BIOS file (e.g.

TRX40DESIGNARE.F1

) to your USB flash drive, or hard

drive. Note: The USB flash drive or hard drive must use FAT32/16/12 file system.

3. Restart the system. During the POST, press the <End> key to enter Q-Flash. Note: You can access Q-Flash

by either pressing the <End> key during the POST or click the

Q-Flash

icon (or press the <F8> key) in BIOS

Setup. However, if the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached

to an independent SATA controller, use the <End> key during the POST to access Q-Flash.

5-1 BIOS Update Utilities

GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash

™

and @BIOS

™

. GIGABYTE Q-Flash

and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mode.
Additionally, this motherboard features the DualBIOS

™

design and supports Q-Flash Plus, providing multiple

protection for the safety and stability of your computer.

What is DualBIOS

™

?

Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and a backup BIOS. Normally, the
system works on the main BIOS. However, if the main BIOS is corrupted or damaged, the backup BIOS will
take over on the next system boot to ensure normal system operation.

What is Q-Flash Plus?

Q-Flash Plus allows you to update the BIOS when your system is off (S5 shutdown state). Save the latest BIOS

on a USB thumb drive and plug it into the dedicated port, and then you can now flash the BIOS automatically

by simply pressing the Q-Flash Plus button.

What is Q-Flash

™

?

With Q-Flash you can update the system BIOS without having to enter operating systems like MS-DOS or

Window first. Embedded in the BIOS, the Q-Flash tool frees you from the hassles of going through complicated
BIOS flashing process.

What is @BIOS

™

?

@BIOS allows you to update the system BIOS while in the Windows environment. @BIOS will download the

latest BIOS file from the nearest @BIOS server site and update the BIOS.

«
...
69
70
71
72
73
...
»

Summary of Contents for TRX40 DESIGNARE

















































































































Reviews:

No comments

Related manuals for TRX40 DESIGNARE

NF796M-H310 Series

Brand: JETWAY Pages: 63

Brand: AOpen Pages: 8

Brand: Actel Pages: 2

Brand: Analog Devices Pages: 13

Brand: Beck Pages: 24

TPS61090EVM-029

Brand: Texas Instruments Pages: 19

Brand: MSI Pages: 48

Brand: AOpen Pages: 8

Brand: Tadao Pages: 3

Brand: IWILL Pages: 48

Brand: Merit Pages: 4

ECM-5716 Series

Brand: Aaeon Pages: 131

ISL9122AIIN-EVZ

Brand: Renesas Pages: 17

Brand: Gigabyte Pages: 44

Brand: CyberResearch Pages: 286

Brand: ComNav Technology Pages: 28

Brand: TYAN Pages: 117

Brand: DFI Pages: 65

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands