Gigabyte TRX40 DESIGNARE, User Manual, Page: 64 / 112

- 64 - Configuring a RAID Set
Step 4:
On the
Select Physical Disks screen, select the hard drives to be included in the RAID array and set them to
Enabled . Next, use the down arrow key to move to Apply Changes and press <Enter> (Figure 5).Then return
to the previous screen and set the Array Size , Array Size Unit , Read Cache Policy and Write Cache Policy .
Step 5:
After setting the capacity, move to
Create Array and press <Enter> to begin. (Figure 6)
Figure 5
Figure 6