manualshive.com logo in svg

Gigabyte T181-Z70, User Manual, Page: 101 / 134

Share
Download
Gigabyte T181-Z70 User Manual Download Page 101

- 101 -

BIOS Setup

Parameter

Description

Hot Plug Handling mode

Controls the Hot Plug Handling mode.
Options available: Auto, A0 Mode, OS First (No Error Handling), 
OS First (Error Handling-Not Implemented), Firmware First (Not Implemented).
Default setting is 

Auto

.

Presence Detect Select 
mode

Controls the Presence Detect Select mode.
Options available: Auto, OR, AND. Default setting is 

Auto

.

Preferred IO Device

Configures Preferred IO Device.

Options available: Auto, Manual. Default setting is 

Auto

.

Loopback Mode

Enabled/Disabled PCIe Loopback mode.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

CV test

Set this to Enabled to support running PCIECV tool. 
Auto: preserve hardware defaults.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

CAC Weight Adjustment

EDC Mode select.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto.

SEV-SNP Support

Options available: Enable, Disable. Default setting is 

Enable

.

SRIS

Options available: Auto, Enable, Disable. Default setting is 

Auto

.

Summary of Contents for T181-Z70







































































































































Reviews:

No comments