Serial ATA RAID Quick User’s Guide
37
2. If you want to delete a disk array you selected, you can highlight the
disk array and then click the button “Delete”. Then a warning message
will be popup, and pay attention to the warning message.
3. Next, you can click the button “Delete” to delete this RAID0+1 array
and all disk will become single disk. Then some warning messages
which are the same with previous those will be popup.
4. Or, you can click the button “Degrade” to degrade RAID0+1 set to
become a completed RAID0 set. See below:
NOTE:
The degrading operation is workable only when the RAID 0+1
set has any one completed RAID 0 set existed.
