Serial ATA RAID Quick User’s Guide
30
operation, the boot disk can’t be placed
on 964.
Split data (Boot from 964): This operation is similar to “Split data
into Raid0” operation, but system boots
from 964.
Ok: Start the operation.
Cancel: Cancel the operation.
<Disk Copy Remaining Sector>: Show the remaining splitting data.
NOTE:
miniCapacity x N > SourceCapacity
miniCapacity: The minimum size of all selected disks.
SourceCapacity: The size of source disk.
N: Total disk numbers.
6. Next, you can click “Cancel” button to leave or click “Ok” button to
continue after the operation being selected. The differential warning
messages will be popup following the differential operations. The
warning messages are similar to JBOD array creation but the
operation is “Split data into Raid0”.
7. If the operation is “Split data into Raid0”, a warning message will be
popup, seeing below:
Next, you can click “Yes” button to start the operation or click “No”
button to cancel.
8. When the operation is finished, the restart warning message will be
popup as well as JBOD array creation except for the operation “Split
boot OS into Raid0”.
