Gigabyte S472-Z30 User Manual Download Page 35

Page: 35 / 138

- 35 -

System Hardware Installation

Follow these instructions to install a 2.5" hard disk drive:

Front Side

1. Press the release button.

2. Extend the locking lever.

3. Pull the locking lever in the direction indicated to remove the HDD tray.

4. Align the hard disk drive with the positioning stud on the HDD tray.

5. Slide the hard disk drive into the HDD tray.

6. Reinsert the HDD tray into the slot and close the locking lever.

Rear Side

1. Press the release button.

2. Extend the locking lever.

3. Pull the locking lever in the direction indicated to remove the HDD tray.

4. Align the hard disk drive with the positioning stud on the HDD tray.

5. Slide the hard disk drive into the HDD tray.

6. Reinsert the HDD tray into the slot and close the locking lever.

Summary of Contents for S472-Z30











































































































































Search results

Summary of Contents for S472-Z30

Reviews:

Related manuals for S472-Z30

Brands by name

Popular brands

Gigabyte S472-Z30, User Manual

Search results

Summary of Contents for S472-Z30

Reviews:

Related manuals for S472-Z30

Brands by name

Popular brands