Gigabyte S461-3T0, User Manual

Page: 86 / 116

BIOS Setup - 86 -
5-3-7 PCH Configuration
Parameter
Description
PCH Configuration
PCH SATA Configuration
Press [Enter] to configure advanced items.
Š
SATA Controller
– Enable/Disable SATA controller.
– Options available: Enable/Disable. Default setting is Enable .
Š
Configure SATA as
– Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its
AHCI functionality. Then the RAID function is disabled and cannot
be access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both
its RAID and AHCI functions. You will be allowed to access the
RAID setup utility at boot time.
– Options available: AHCI/RAID. Default setting is AHCI .
Š
Alternate Device ID on RAID
(Note 1)
– Enable/Disable Alternate Device ID on RAID mode.
– Options available: Enable/Disable. Default setting is Disabled
– Please note that this option appears when HDD is in RAID Mode .
Š
SATA Port 0/1/2/3/4/5/6/7
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.