Gigabyte S451-3R1 User Manual Download Page 80

Page: 80 / 114

BIOS Setup

- 80 -

Parameter

Description

Intel

VT for Directed I/O (VT-d)

(continued)

Posted Interrupt

– Enable/Disable VT_D posted interrupt.

– Options available: Enable/Disable. Default setting is

Enable

Coherency Support (Non-Isoch)

– Enable/Disable Non-Isoch VT_D Engine Coherency support.

– Options available: Enable/Disable. Default setting is

Enable

Intel

VMD technology

Press [Enter] to configure advanced items.

Intel

VMD technology

Intel

VMD Configuration

– Enable/Disable the Intel VMD support function.

– Options available: Enable/Disable. Default setting is

Disable

MCTP

Enable/Disable MCTP (Management Component Transport Protocol).
Options available: Enable/Disable. Default setting is

Disable

Summary of Contents for S451-3R1



















































































































Search results

Summary of Contents for S451-3R1

Reviews:

Related manuals for S451-3R1

Brands by name

Popular brands

Gigabyte S451-3R1, User Manual

Search results

Summary of Contents for S451-3R1

Reviews:

Related manuals for S451-3R1

Brands by name

Popular brands