Gigabyte R282-G30 User Manual Download

Page: 96 / 109

- 96 -

BIOS Setup

5-4-1 System Event Log

Parameter

Description

Enabling / Disabling Options

SEL Components

Change this item to enable or disable all features of System Event
Logging during boot.
Options available: Enabled, Disabled. Default setting is

Enabled

Erasing Settings

Erase SEL

Choose options for erasing SEL.
Options available: No,

Yes, On next reset,
Yes, On every reset.

Default setting is

When SEL is Full

Choose options for reactions to a full SEL.
Options available: Do Nothing, Erase Immediately, Delete Oldest Record.
Default setting is

Do Nothing

Custom EFI Logging Options

Log EFI Status Codes

Enable/Disable the logging of EFI Status Codes (if not already converted
to legacy).
Options available: Disabled, Both, Error code, Progress code. Default
setting is

Error code

Summary of Contents for R282-G30














































































































Search results

Summary of Contents for R282-G30

Reviews:

Related manuals for R282-G30

Brands by name

Popular brands

Gigabyte R282-G30, User Manual

Search results

Summary of Contents for R282-G30

Reviews:

Related manuals for R282-G30

Brands by name

Popular brands