manualshive.com logo in svg

Gigabyte R282-G30, User Manual, Page: 52 / 109

Share
Download
Gigabyte R282-G30 User Manual Download Page 52

- 52 -

BIOS Setup

Parameter

Description

BIOS Information
Project Name

Displays the project name information.

Project Version

Displays version number of the BIOS setup utility.

Build Date and Time

Displays the date and time when the BIOS setup utility was created.

BMC Information

(Note1)

BMC Firmware Version

(Note1)

Displays BMC firmware version information.

Processor Information
CPU Brand String/

 

Max CPU Speed 

/ CPU Signature / Processor Core / 

Microcode Patch 

Displays the technical information for the installed processor(s).

Platform Information

Processor/ PCH/ RC Revision

Displays the platform information of the installed processor(s) and 
PCH.

Memory Information
Total Memory

(Note2)

Displays the total memory size of the installed memory.

Usable Memory

(Note2)

Displays the usable memory size of the installed memory.

(Note1)  Functions available on selected models..
(Note2)  This section will display capacity and frequency information of the memory that the customer has
  installed.

Summary of Contents for R282-G30














































































































Reviews:

No comments