System Appearance
- 20 -
6.
System
Status LED
Green
On
Indicates system is operating normally.
Amber
On
Indicates a critical condition, may include:
-System fan failure
-System temperature
Blink
Indicates non-critical condition, may include:
-Redundant power module failure
-Temperature and voltage issue
N/A
Off
Indicates system is not ready, may include:
-POST error
-NMI error
-Processor or terminator is missing
7.
LAN1 Active/
Link LED
Green
On
Indicates a link between the system and the network or
no access.
Green
Blink
Indicates data trasmission or receiving is occuring.
N/A
Off
Indicates no data transmission or receiving is occuring.
8.
LAN2 Active/
Link LED
Green
On
Indicates a link between the system and the network or
no access.
Green
Blink
Indicates data trasmission or receiving is occuring.
N/A
Off
Indicates no data transmission or receiving is occuring.
Summary of Contents for R272-Z30
