- 11 -
Hardware Installation
Expansion Slot
(R272-Z32)
Total 6 x low profile PCIe Gen4 / Gen3 expansion slots
Slot_6: 1 x PCIe x16 (Gen4 x16 bus) slot; Occupied by CNV3024, 4 x NVMe HBA
Slot_5: 1 x PCIe x16 (Gen4 x8 bus) slot
Slot_4: 1 x PCIe x16 (Gen4 x16 bus) slot; Occupied by CNV3024, 4 x NVMe HBA
Slot_3: 1 x PCIe x16 (Gen4 x16 bus) slot; Occupied by CNV3024, 4 x NVMe HBA
Slot_2: 1 x PCIe x8 (Gen3 x0 or x8 bus) slot; no function
Slot_1: 1 x PCIe x16 (Gen3 x16 or x8 bus) slot; Occupied by CNV3024, 4 x
NVMe HBA
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16; Occupied by CNV3024, 4
x NVMe HBA
2 x M.2 slots:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280 cards
Storage
(R272-Z30)
Total 14 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Front side: 12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays ( 8 x from optional
SAS HBA and 4 x from onboard SATA ports)
2.5" HDD/SSD supported
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays ( from onboard
SATA ports)
Front side default configuration supports:
4 x SATA drives
8 x SAS drives via optional SAS HBA
SAS card is required for SAS devices support
4 x SATA in front side and 2 x SATA in rear side are available in default setting
(R272-Z31)
Total 26 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Front side: 24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
All devices are connected with SAS expander
Onboard SAS35x36R expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
0 x SAS/SATA drives
Please select SAS card to enable the drive bays
(R272-Z32)
Total 26 x 2.5" hot-swappable HDD/SSD bays
- Front side: 24 x 2.5" NVMe hot-swappable SSD bays
- Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
SAS
Supported via add-on SAS Card
Summary of Contents for R272-Z30
