Gigabyte MZ32-AR1 User Manual Download Page 91

Page: 91 / 122

- 91 -

BIOS Setup

2-3-4 NBIO Common Options

Parameter

Description

NBIO Common Options

IOMMU

Enable/Disable the IOMMU function.
Options available: Enabled, Disabled. Default setting is

Enabled

DMAr Support

Enable/Disable DMAr system protection during POST.
Options available: Enabled, Disabled, Auto. Default setting is

Auto

PCIe ARI Support

Enable/Disable Alternative Routing-ID Interpretation.
Options available: Auto, Enabled, Disabled. Default setting is

Auto

PCIe ARI Enumeration

ARI Forwarding Enable for each downstream port.
Options available: Auto, Enable, Disable. Default setting is

Auto

PCIe Ten Bit Tag Support

Enable/Disable PCIe ten bit tags for supported devices. (Auto=Disabled)
Options available: Auto, Enabled, Disabled. Default setting is

Auto

SMU Common Options

Press [Enter] for configuration of advanced items.

NBIO RAS Common
Options

Press [Enter] for configuration of advanced items.

Enable AER Cap

Enable/Disable Advanced Error Reporting Capability.
Options available: Auto, Enabled, Disabled. Default setting is

Auto

Early Link Speed

Configures Early Link Speed.

Options available: Auto, Gen1, Gen2. Default setting is

Auto

Summary of Contents for MZ32-AR1



























































































































Search results

Summary of Contents for MZ32-AR1

Reviews:

Related manuals for MZ32-AR1

Brands by name

Popular brands

Gigabyte MZ32-AR1, User Manual

Search results

Summary of Contents for MZ32-AR1

Reviews:

Related manuals for MZ32-AR1

Brands by name

Popular brands