14
GS-SR147S Rack mount Serv er
Step 3-5: PCI Expansion Card Installation
GS-SR147S provides expansion riser slots for one PCI-X full-height/full-length 64/66MHz; and one with
PCI-X low-profile 64-Bit/66MHz. To install the peripheral, please go through the following steps.
Note!!
Before installing the PCI expansion card, please check the card size limitation. Size limitation
for PCI-X full-height/full-length is 228.5 mm x 91.5 mm; size limitation for Low-Profile Card : 167.5 mm
x 56 mm .
Step 1 Remove the screws on the riser bracket.
Step 2 Detach the riser bracket with both hands.
Step 3 Installing the PCI Riser card. To install the riser card, just simply push it into the module.
Step 4 Finally, align the stable racks to the system module (see the arrow direction mark 1), and push
down vertically.
Step 5 Reverse Step 1 & 2 to secure the riser bracket firmly. Installation completed.
Step 1
Step 2
Step 3
Step 4
