manualshive.com logo in svg

Gigabyte GA-Z97X-Gaming G1, User Manual, Page: 92 / 136

Share
Download
Gigabyte GA-Z97X-Gaming G1 User Manual Download Page 92

Unique Features

- 92 -

B. Updating the BIOS

In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the 

BIOS, choose the location where the BIOS file is saved. The following procedure assumes that you save the 
BIOS file to a USB flash drive.

Step 1:

1.  Insert the USB flash drive containing the BIOS file into the computer. In the main menu of Q-Flash, select 

Update BIOS From Drive

.

Step 2:

The process of the system reading the BIOS file from the USB flash drive is displayed on the screen. When 
the message "Are you sure to update BIOS?" appears, select 

Yes

 to begin the BIOS update. The monitor will 

display the update process.

Step 3:
The system will restart after the update process is complete.

2. Select 

USB Flash Drive

.

3.  Select the BIOS update file.

 

•

The 

Save BIOS to Drive

 option allows you to save the current BIOS file.

 

•

Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.

 

•

If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached 

to an independent SATA controller, use the <End> key during the POST to access Q-Flash.

Make sure the BIOS update file matches your motherboard model.

 

•

Do not turn off or restart the system when the system is reading/updating the BIOS.

 

•

Do not remove the USB flash drive or hard drive when the system is updating the BIOS.

Q-Flash Utility v1.05

Model Name  :  Z97X-Gaming G1 

BIOS Version  :  F4b

BIOS Date 

:  04/01/2014

Flash Type/Size  :  MXIC 25L Series 

16MB

Update BIOS From Drive

Save BIOS to Drive

Return to BIOS setup

Select Device

USB Flash Drive

Summary of Contents for GA-Z97X-Gaming G1









































































































































Reviews:

No comments