Gigabyte GA-Z97X-Gaming G1 Page 46 User Manual Download

Page: 46 / 136

BIOS Setup

- 46 -

Advanced Voltage Settings

Advanced Power Settings

CPU VRIN Loadline Calibration

Allows you to set the Load-Line Calibration level for the CPU VRIN. The levels are (from highest to lowest):

Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the CPU Vtt voltage

more consistent with what is set in BIOS under heavy load.

Auto

lets the BIOS automatically configure

this setting and sets the voltage following Intel's specifications. (Default: Auto)

CPU VRIN Protection

Allows you to set the over-current protection level for the CPU VRIN voltage. The adjustable range is from

150.0mV to 400.0mV.

Auto

lets the BIOS automatically configure this setting. (Default: Auto)

Summary of Contents for GA-Z97X-Gaming G1









































































































































Search results

Summary of Contents for GA-Z97X-Gaming G1

Reviews:

Related manuals for GA-Z97X-Gaming G1

Brands by name

Popular brands

Gigabyte GA-Z97X-Gaming G1, User Manual

Search results

Summary of Contents for GA-Z97X-Gaming G1

Reviews:

Related manuals for GA-Z97X-Gaming G1

Brands by name

Popular brands