- 93 -
Appendix
5-2-2 Configuring S/PDIF Out
The S/PDIF Out jacks
(Note 1)
can transmit audio signals to an external decoder for decoding to get the best
audio quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF optical cable to an external decoder for transmitting the S/PDIF digital audio signals.
S/PDIF Optical Cable
(Note 1) The actual locations of the S/PDIF Out connectors may differ by model.
(Note 2) Enter the
Digital
Output(Optical)
screen to configure further settings if you use the S/PDIF Out
connector on the back panel for digital audio output or enter the
Digital
Output
screen if you use
the internal S/PDIF Out connector (SPDIF_O) for digital audio output.
2. Configuring S/PDIF Out:
On the
Digital Output(Optical)
screen
(Note 2)
, click the
Default Format
tab and then select the sample rate
and bit depth. Click
OK
to complete.
Summary of Contents for GA-H67M-UD2H-B3
Page 2: ...Motherboard GA H67M UD2H B3 Jan 18 2011 Jan 18 2011 Motherboard GA H67M UD2H B3 ...
Page 30: ...Hardware Installation 30 ...
Page 101: ... 101 Appendix ...
Page 102: ...Appendix 102 ...
