Gigabyte GA-H67M-UD2H-B3 User Manual Download Page 44

Page: 44 / 104

BIOS Setup

- 44 -

Precomp

Write precompensation cylinder.

Landing Zone

Landing zone.

Sector

Number of sectors.

Halt On

Allows you to determine whether the system will stop for an error during the POST.

All Errors

Whenever the BIOS detects a non-fatal error the system boot will stop.

No Errors

The system boot will not stop for any error.

All, But Keyboard The system boot will not stop for a keyboard error but stop for all other errors.

(Default)

Memory

These fields are read-only and are determined by the BIOS POST.

Base Memory Also called conventional memory. Typically, 640 KB will be reserved for the

MS-DOS operating system.

Extended Memory The amount of extended memory.

Total Memory

The total amount of memory installed on the system.

Summary of Contents for GA-H67M-UD2H-B3









































































































Search results

Summary of Contents for GA-H67M-UD2H-B3

Reviews:

Related manuals for GA-H67M-UD2H-B3

Brands by name

Popular brands

Gigabyte GA-H67M-UD2H-B3, User Manual

Search results

Summary of Contents for GA-H67M-UD2H-B3

Reviews:

Related manuals for GA-H67M-UD2H-B3

Brands by name

Popular brands