Gigabyte GA-H67A-USB3-B3 User Manual Download Page 45

Page: 45 / 104

- 45 -

BIOS Setup

2-6 Integrated Peripherals

eXtreme Hard Drive (Intel H67 Chipset)

Enables or disables the X.H.D function for the SATA controllers integrated in the Intel H67 Chipset.
When set to

Enabled

, the

PCH SATA Control Mode

item below will be set to

RAID(XHD)

automatically.

For details on using the GIGABYTE X.H.D utility, refer to Chaper 4, "eXtreme Hard Drive (X.H.D)." (Default:
Disabled)

PCH SATA Control Mode (Intel H67 Chipset)

Enables or disables RAID for the SATA controllers integrated in the Intel H67 Chipset or configures the

SATA controllers to AHCI mode.

IDE

Disables RAID for the SATA controllers and configures the SATA controllers to IDE

mode. (Default)

RAID(XHD)

Enables RAID for the SATA controllers.

AHCI

Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug.

SATA Port0-3 Native Mode (Intel H67 Chipset)

Specifies the operating mode of the integrated SATA controllers.

Disabled

Allows the SATA controllers to operate in Legacy IDE mode.

In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with

other device. Set this option to

Disabled

if you wish to install operating systems that

do not support Native mode.

Enabled

Allows the SATA controllers to operate in Native IDE mode. Enable Native IDE mode if you

wish to install operating systems that support Native mode. (Default)

USB Controllers

Enables or disables the integrated USB controller. (Default: Enabled)

Disabled

will turn off all of the USB functionalities below.

USB Legacy Function

Allows USB keyboard to be used in MS-DOS. (Default: Enabled)

Integrated Peripherals

eXtreme Hard Drive (XHD)

[Disabled]

PCH SATA Control Mode

[IDE]

SATA Port0-3 Native Mode

[Enabled]

USB Controllers

[Enabled]

USB Legacy Function

[Enabled]

USB Storage Function

[Enabled]

Azalia Codec

[Auto]

Onboard H/W LAN

[Enabled]



SMART LAN

[Press Enter]

Onboard LAN Boot ROM

[Disabled]

Onboard Serial Port 1

[3F8/IRQ4]

higf

: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level



Summary of Contents for GA-H67A-USB3-B3









































































































Search results

Summary of Contents for GA-H67A-USB3-B3

Reviews:

Related manuals for GA-H67A-USB3-B3

Brands by name

Popular brands

Gigabyte GA-H67A-USB3-B3, User Manual

Search results

Summary of Contents for GA-H67A-USB3-B3

Reviews:

Related manuals for GA-H67A-USB3-B3

Brands by name

Popular brands