Gigabyte GA-H67A-USB3-B3, User Manual

Page: 63 / 104

- 63 - Unique Features
B. Updating the BIOS
When updating the BIOS, choose the location where the BIOS file is saved. The following procedure as -
sumes that you save the BIOS file to a USB flash drive.
Step 1:
1. Insert the USB flash drive containing the BIOS file into the computer. In the main menu of Q-Flash, use
the up or down arrow key to select Update BIOS from Drive and press <Enter>.
Step 2:
The process of the system reading the BIOS file from the USB flash drive is displayed on the screen. When
the message "Are you sure to update BIOS?" appears, press <Enter> to begin the BIOS update. The monitor
will display the update process.
Step 3:
When the update process is complete, press any key to return to the main menu.
2. Select HDD 1-0 and press <Enter>.
3. Select the BIOS update file and press <Enter>.
•
The Save Main BIOS to Drive option allows you to save the current BIOS file.
•
Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.
•
If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to
an independent SATA controller, use the <End> key during the POST to access Q-Flash.
Q-Flash Utility v2.21
Flash Type/Size................................. MXIC 25L3206E 4M
Keep DMI Data Enable
Load CMOS Default Enable
Update BIOS from Drive
Save BIOS to Drive
Enter : Run
hi
:Move ESC:Reset F10:Power Off
Q-Flash Utility v2.21
Flash Type/Size................................. MXIC 25L3206E 4M
Keep DMI Data Enable
Load CMOS Default Enable
Update BIOS from Drive
Save BIOS to Drive
Enter : Run
hi
:Move ESC:Reset F10:Power Off
!! Copy BIOS completed - Pass !!
Please press any key to continue
Make sure the BIOS update file matches your motherboard model.
• Do not turn off or restart the system when the system is reading/updating the BIOS.
• Do not remove the USB flash drive or hard drive when the system is updating the BIOS.
HDD 1-0 <Drive>
Total size : 0 Free size : 0
0 file(s) found