manualshive.com logo in svg

Gigabyte GA-G41M-Combo, User Manual, Page: 47 / 88

Share
Download
Gigabyte GA-G41M-Combo User Manual Download Page 47

- 47 -

BIOS Setup

  When a Cable Problem Occurs...

 

If a cable problem occurs on a specified pair of wires, the Status field will show Short and thenlength 

shown will be the approximate distance to the fault or short. 

 

Example: 

Part1-2 Status = Short / Length  =  2m

 

Explanation: A fault or short might occur at about 2m on Pair 1-2. 

  Onboard LAN Boot ROM

 

Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. 

 

(Default: Disabled)

  Onboard Serial Port 1

 

Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. 

Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.

  Onboard Serial Port 2 

 

Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. 

Options are: Auto, 3F8/IRQ4, 2F8/IRQ3 (default), 3E8/IRQ4, 2E8/IRQ3, Disabled. 

  Onboard Parallel Port

 

Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and correspond

-

ing interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled. 

  Parallel Port Mode 

 

Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)
(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.

  USB 1.0 Controller

 

Enables or disables the integrated USB controller. (Default: Enabled)

 

Disabled

 will turn off all of the USB functionalities below.

  USB 2.0 Controller

 

Enables or disables the integrated USB 2.0 controller. (Default: Enabled)

  USB Keyboard Function

 

Allows USB keyboard to be used in MS-DOS. (Default: Disabled)

  USB Mouse Function

 

Allows USB mouse to be used in MS-DOS. (Default: Disabled)

  USB Storage Function

 

Determines whether to detect USB storage devices, including USB flash drives and USB hard drives 

during the POST. (Default: Enabled)

Summary of Contents for GA-G41M-Combo

























































































Reviews:

No comments