manualshive.com logo in svg

Gigabyte GA-G41M-Combo, User Manual, Page: 39 / 88

Share
Download
Gigabyte GA-G41M-Combo User Manual Download Page 39

- 39 -

BIOS Setup

  Date (mm:dd:yy)

 

Sets the system date. The date format is week (read-only), month, date and year. Select the desired field 

and use the up arrow or down arrow key to set the date. 

  Time (hh:mm:ss)

 

Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or 

down arrow key to set the time. 

  IDE Channel 0 Master/Slave

 

IDE Channel 0 Master/Slave

 

Configure your IDE/SATA devices by using one of the three methods below:

 

 

• 

Auto   

 

Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) 

 

 

• 

None   

 

If no IDE/SATA devices are used, set this item to 

None

 so the system will skip  

 

 

 

 

 

 

the detection of the device during the POST for faster system startup.

 

 

• 

Manual  

 

Allows you to manually enter the specifications of the hard drive when the hard  

 

 

 

 

 

 

drive access mode is set to 

CHS

.

 

Access Mode   

Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.

  IDE Channel 2, 3 Master/Slave

 

Extended IDE Drive 

 

Configure your IDE/SATA devices by using one of the two methods below:

 

 

• 

Auto   

 

Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default)

 

 

• 

None   

 

If no IDE/SATA devices are used, set this item to 

None

 so the system will skip  

 

 

 

 

 

 

the detection of the device during the POST for faster system startup.

 

Access Mode   

Sets the hard drive access mode. Options are: Auto (default), Large.

2-4  Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software

Standard CMOS Features

  Date (mm:dd:yy)  

 

 

Mon, 

May  10  2010

  Time (hh:mm:ss)  

 

 

22:31:24

  IDE Channel 0 Master   

 

[None]

  IDE Channel 0 Slave   

 

[None]

  IDE Channel 2 Master   

 

[None]

  IDE Channel 2 Slave   

 

[None]

  IDE Channel 3 Master   

 

[None]

  IDE Channel 3 Slave   

 

[None]

  Drive A 

 

 

 

 

[1.44M, 3.5"]

  Floppy 3 Mode Support  

 

[Disabled]

  Halt On   

 

 

 

[All, But Keyboard]

  Base Memory   

 

 

640K

  Extended Memory 

 

 

2012M

  Total Memory   

 

 

2014M

higf

: Move 

Enter: Select 

+/-/PU/PD: Value 

F10: Save 

ESC: Exit 

F1: General Help

 

F5: Previous Values 

F6: Fail-Safe Defaults   

F7: Optimized Defaults

Item Help

Menu Level

 

Summary of Contents for GA-G41M-Combo

























































































Reviews:

No comments