Gigabyte GA-G41M-Combo, User Manual, Page: 17 / 88

- 17 - Hardware Installation
Notch
1-4-2 Installing a Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Do not install DDR
DIMMs on this motherboard.
Populating DDR2 and DDR3 memory modules simultaneously is not supported.
DDR2 DIMM
A DDR3/DDR2 memory module has a notch, so it can only fit in one direction. Follow the steps below to cor -
rectly install your memory modules in the memory sockets.
Step 1:
Note the orientation of the memory module. Spread the retaining
clips at both ends of the memory socket. Place the memory module
on the socket. As indicated in the picture on the left, place your fin -
gers on the top edge of the memory, push down on the memory and
insert it vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place when the
memory module is securely inserted.
DDR3 DIMM