manualshive.com logo in svg

Gigabyte GA-G31-S3G, User Manual, Page: 68 / 84

Share
Download
Gigabyte GA-G31-S3G User Manual Download Page 68

GA-G31-S3G Motherboard

- 68 -

Step 2:
The pictures to the right show the 2-, 4-, 5.1-channel
speaker configurations.

Center/Subwoofer
Speaker Out

5.1-Channel Speakers:

Rear Speaker Out

Front Speaker Out

4-Channel Speakers:

Rear Speaker Out

Front Speaker Out

Speakers or
Headphones

2-Channel Speakers:

Step 3:
On the 

Speakers

 screen, click the 

Speaker Configu-

ration

 tab. In the 

Speaker Configuration

 list, select

Stereo

, 

Quadraphonic

, or

 5.1 Speaker

 according to

the type of speaker configuration you wish to set up.
Then the speaker setup is completed.

B. Configuring Sound Effect:

You may configure an audio environment on the 

Sound Effects

 tab.

If your chassis provides an AC'97 front panel audio
module, to activate the AC'97 functionality, click the
tool icon on the 

Speaker Configuration

 tab. On the

Connector Settings

 dialog box, select the 

Disable

front panel jack detection 

check box. Click 

OK

 to

complete.

C. Activating an AC'97 Front Panel Audio Module:

Summary of Contents for GA-G31-S3G





















































































Reviews:

No comments