- 35 -
BIOS Setup
2-3
MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster
[Auto]
CPU Clock Ratio
(Note)
[14X]
Fine CPU Clock Ratio
(Note)
[+0.0]
x
CPU Frequency
3.73GHz (266x14)
CPU Host Clock Control
[Disabled]
x
CPU Host Frequency (Mhz)
266
PCI Express Frequency (Mhz)
[Auto]
Performance Enhance
[Turbo]
System Memory Multiplier (SPD)
[Auto]
Memory Frequency (Mhz) 533
533
******** System Voltage Optimized ********
System Voltage Control
[Manual]
DDR2 OverVoltage Control
[Normal]
PCI-E OverVoltage Control
[Normal]
FSB OverVoltage Control
[Normal]
(G)MCH OverVoltage Control
[Normal]
CPU Voltage Control
[Normal]
Normal CPU Vcore
1.30000V
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
Robust Graphics Booster
Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and
memory.
Auto
allows the BIOS to automatically set the R.G.B. mode based on system
configurations. Options are: Auto (default), Fast, Turbo.
CPU Clock Ratio
(Note)
Allows you to alter the clock ratio for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.
Fine CPU Clock Ratio
(Note)
Allows you to increases clock ratio by 0.5 for the installed CPU.
The item is present only if a CPU with unlocked clock ratio is installed.
CPU Frequency
Displays the current operating CPU frequency.
(Note) This item appears only if you install a CPU that supports this feature.
•
Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately
altering the settings may result in system's failure to boot. If this occurs, clear the CMOS
values and reset the board to default values.)
•
When the
System Voltage Optimized
item blinks in red, it is recommended that you set
the
System Voltage Control
item to
Auto
to optimize the system voltage settings.
Summary of Contents for GA-G31-S3G
