manualshive.com logo in svg

Gigabyte GA-G31-S3G, User Manual, Page: 24 / 84

Share
Download
Gigabyte GA-G31-S3G User Manual Download Page 24

GA-G31-S3G Motherboard

- 24 -

6) IDE (IDE Connector)

The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before
attaching the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE
devices, remember to set the jumpers and the cabling according to the role of the IDE devices (for
example, master or slave). (For information about configuring master/slave settings for the IDE
devices, read the instructions from the device manufacturers.)

7) SATAII0/1/2/3 (SATA 3Gb/s Connectors)

The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s
standard. Each SATA connector supports a single SATA device.

39

1

40

2

Pin No.

Definition

1

GND

2

TXP

3

TXN

4

GND

5

RXN

6

RXP

7

GND

Please connect the L-shaped end
of the SATA 3Gb/s cable to your
SATA hard drive.

7

1

7

1

SATAII0

SATAII1

7

1

7

1

SATAII2

SATAII3

Summary of Contents for GA-G31-S3G





















































































Reviews:

No comments