Gigabyte GA-8I865GVMK User Manual Download

Page: 85 / 112

Technical Reference

- 81 -

English

Install Microsoft DirectX8.1 or later version before to enable Jack-Sensing support for Windows
98/98SE/2000/ME.

Introduction of audio connectors

You may connect CDROM, Walkman or others

audio input devices to Line In jack, speakers,

earphone or others output devices to Line Out jack,
and microphone to MIC In jack.

Jack-Sensing includes 2 parts: AUTO and MANUAL. Following is an example for 2 channels

(Windows XP):

Please connect the devices to the right jacks as
above. A window will appear as right picture if you
setup the devices properly.

Please note that 3D audio function will only appear
when 3D audio inputs.

Auto-detecting:

Jack-Sensing provides audio connectors error-detection
function.

Jack-Sensing Introduction

Summary of Contents for GA-8I865GVMK

















































































































Search results

Summary of Contents for GA-8I865GVMK

Reviews:

Related manuals for GA-8I865GVMK

Brands by name

Popular brands

Gigabyte GA-8I865GVMK, User Manual

Search results

Summary of Contents for GA-8I865GVMK

Reviews:

Related manuals for GA-8I865GVMK

Brands by name

Popular brands