Gigabyte GA-8I865GME User Manual Download Page 20 | Manualshive

Page: 20 / 72

background image

GA-8I865GME Motherboard

- 20 -

English

3/4/5) CPU_FAN / SYS_FAN / PWR_FAN* (Cooler Fan Power Connector)

The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and
possesses a foolproof connection design.
Most coolers are designed with color-coded power connector wires. A red power connector wire
indicates a positive connection and requires a +12V power voltage. The black connector wire is the
ground wire (GND).
Please remember to connect the power to the cooler to prevent system overheating and failure.
Caution!
Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.

1

Pin No.

Definition

1

GND

2

+12V

3

Sense

6) FDD (FDD Connector)

The FDD connector is used to connect the FDD cable while the other end of the cable connects to the
FDD drive. The types of FDD drives supported are: 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB.
Please connect the red power connector wire to the pin1 position.

SYS_FAN

CPU_FAN

1

1

34

2

33

PWR_FAN*

1

* Only for DB customer.

«
...
18
19
20
21
22
...
»

Summary of Contents for GA-8I865GME









































































Reviews:

No comments

Related manuals for GA-8I865GME

Brand: Ublox Pages: 27

Brand: Abit Pages: 48

Brand: Quick Pages: 32

Brand: JETWAY Pages: 38

TPS628436-7-8EVM-167

Brand: Texas Instruments Pages: 15

Brand: ASROCK Pages: 145

Brand: ST Pages: 82

IMBA-BDE-1518-R10

Brand: IEI Technology Pages: 14

EVAL-6ED100HPDRIVE-AS

Brand: Infineon Pages: 14

Z68A-G45 B3 Series

Brand: MSI Pages: 138

SBC81870 Series

Brand: AXIOMTEK Pages: 120

Brand: Atmel Pages: 59

Brand: BCM Pages: 59

Brand: Zamel Pages: 3

Brand: Alinx Pages: 29

Brand: Intel Pages: 91

Brand: TRU Components Pages: 4

Brand: MSI Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands