Gigabyte GA-880GMA-USB3 User Manual Download

Page: 48 / 100

BIOS Setup

- 48 -

Onboard Audio Function

Enables or disables the onboard audio function. (Default: Enabled)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled

Onboard USB 3.0 Controller (Etron EJ168 USB Controller, USB Connectors on the

Back Panel)

Enables or disables the Etron EJ168 USB controller. (Default: Enabled)

USB Controllers

Enables or disables the integrated USB controllers. (Default: Enabled)

Disabled

will turn off all of the USB functionalities below.

USB Legacy Function

Allows USB keyboard to be used in MS-DOS. (Default: Enabled)

USB Storage Function

Determines whether to detect USB storage devices, including USB flash drives and USB hard drives

during the POST. (Default: Enabled)

Onboard Serial Port 1

Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.

Options are: Auto, 2F8/IRQ3, 3F8/IRQ4(default), 3E8/IRQ4, 2E8/IRQ3, Disabled.

Summary of Contents for GA-880GMA-USB3





































































































Search results

Summary of Contents for GA-880GMA-USB3

Reviews:

Related manuals for GA-880GMA-USB3

Brands by name

Popular brands

Gigabyte GA-880GMA-USB3, User Manual

Search results

Summary of Contents for GA-880GMA-USB3

Reviews:

Related manuals for GA-880GMA-USB3

Brands by name

Popular brands