Gigabyte GA-7VM400M-P, User Manual

Page: 63 / 96

Technical Reference
- 59 -
English
Flash BIOS Method Introduction
Method 1: Q-Flash
A. What is Q-Flash Utility?
Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS
mode, no more fooling around any OS.
B. How to use Q-Flash?
a. After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it
will allow you to enter AWARD BIOS CMOS SETUP, then press <F8> to enter Q-Flash utility.
b. Q-Flash Utility
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
} Standard CMOS Features Load Fail-Safe Defaults
} Advanced BIOS Features Load Optimized Defaults
}
Integrated Peripherals Set Supervisor Password
} Power Management Setup Set User Password
} PnP/PCI Configurations Save & Exit Setup
}
PC Health Status Exit Without Saving
} Frequency/Voltage Control
ESC:Quit higf :Select Item
F8: Q-Flash F10:Save & Exit Setup
Tim e, Date, Hard Disk Type...
Q-Flash Utility V1.30
Flash Type/Size : SST 39SF020 / 256K
Enter: Run hi : Move ESC: Reset F10: Power OFF
Keep DMI Data Enabled
Load BIOS from Floppy
Save BIOS to Floppy
Enter Q-Flash Utility (Y/N)? Y