Gigabyte GA-7VAX-A, User Manual

Page: 59 / 112

BIOS Setup
- 55 -
English
F
PCI/AGP Frequency (MHz)
8
The values depend on CPU Host Frequency(Mhz) .
F
DRAM Clock (MHz)
M
Wrong frequency may make system can’t boot. Clear CMOS to overcome wrong frequency issue.
8
Please set DRAM Clock according to your requirement.
If you use DDR266 DRAM module, please set “DRAM Clock(MHz)” to “133-DDR266”. If you use
DDR333 DRAM module, please set “DRAM Clock(MHz)” to “166-DDR333”. If you use
DDR400 DRAM module, please set “DRAM Clock(MHz)” to “200-DDR400”.
Incorrect using it may cause your system broken. For power End-User use only!
8
By SPD Auto setting Memory frequency. (Default value)
F
CPU OverVoltage Control
Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this
feature.
8
Auto Supply voltage as CPU reguired. (Default value)
8
+5% / +7.5% / +10% Increase voltage range as user selected.
F
AGP OverVoltage Control
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable
this feature.
8
Auto Supply voltage as AGP Card reguired. (Default value)
8
+0.1V~+.03V Set AGP voltage from 1.6V~1.8V.
F
DIMM OverVoltage Control
Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when
enable this feature.
8
Auto Supply voltage as DRAM module reguired. (Default value)
8
+0.1V~+.03V Set DIMM voltage from 2.6V~2.8V.