Gigabyte GA-7VAX-A, User Manual

Page: 46 / 112

- 42 - KT400A Series Motherboard
English
8
LAN Select your boot device priority by LAN.
8
USB-CDROMSelect your boot device priority by USB-CDROM.
8
USB-ZIP Select your boot device priority by USB-ZIP.
8
USB-FDD Select your boot device priority by USB-FDD.
8
USB-HDD Select your boot device priority by USB-HDD.
8
ZIP Select your boot device priority by ZIP.
8
8Disabled Disabled this function.
F
Boot Up Fl oppy Seek
M During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is
40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
8
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are
all 80tracks.
8
Disabled BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360 K.
(Default value)
F
Passwor d Check
8
Setup The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
8
System The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
C
Flexible AGP 8X
8
Auto Automatically set AGP transfer rate according to AGP compatibility and
stability. (Default value)
8
8X Always set AGP transfer rate to 8X if the 8X mode supported by the AGP
card.
8
4X Set AGP transfer rate to 4X mode no matter what the AGP transfer rate the
card is.
F
Init Display First
M This feature allows you to select the first initation of the monitor display from which card, when
you install an AGP VGA card and a PCI VGA card on board.
8
PCI Set Init Display First to PCI Slot.
8
AGP Set Init Display First to AGP. (Default value)