Gigabyte GA-6VX7B-4X User Manual Download

Page: 64 / 86

6VX7B-4X Motherboard

••••

MODEM Use IRQ

Set MODEM Use IRQ to NA.

Set MODEM Use IRQ to 3.

Set MODEM Use IRQ to 4. (Default Value)

Set MODEM Use IRQ to 5.

Set MODEM Use IRQ to 7.

••••

Modem Ring On/Wake On Lan

Disabled

Disabled Modem Ring On/Wake On Lan.

Enabled

Enabled Modem Ring On/Wake On Lan. (Default Value)

••••

PME Event Wake up

Disabled

Disabled PME Event Wake up function.

Enabled

Enabled PME Event Wake up function. (Default Value)

••••

RTC Alarm Power On

You can set “RTC Alarm Power On” item to Enabled and key in date/time to power on
system.

Disabled

Disable this function. (Default Value)

Enabled

Enable alarm function to POWER ON system.

If the “RTC Alarm Power On” is Enabled.

RTC Alarm Date :

Every Day,1~31

RTC Alarm Hour:

0~23

RTC Alarm Minute :

0~59

RTC Alarm Second :

0~59

Summary of Contents for GA-6VX7B-4X























































































Search results

Summary of Contents for GA-6VX7B-4X

Reviews:

Related manuals for GA-6VX7B-4X

Brands by name

Popular brands

Gigabyte GA-6VX7B-4X, User Manual

Search results

Summary of Contents for GA-6VX7B-4X

Reviews:

Related manuals for GA-6VX7B-4X

Brands by name

Popular brands