Gigabyte G241-G40 User Manual Download Page 80

Page: 80 / 117

- 80 -

BIOS Setup

5-3-4

Memory Configuration

Parameter

Description

Integrated Memory Controller (iMC)

Enforce POR

When set to Enable, the system enforces Plan Of Record restrictions
for DDR4 frequency and voltage programming. When set to Auto,
the system sets it to the MRC default settings.
Options available: Auto, POR, Disable. Default setting is

Auto

Memory Frequency

Configures the maximum memory frequency.

Options available: Auto, 2133, 2400, 2666, 2933.

Default setting is

Auto

Enable ADR

Enables the detecting and enabling of ADR (Asynchronous DRAM
Refresh) function.
Options available: Enable/Disable. Default setting is

Enable

Legacy ADR Mode

Enable/Disable the Legacy ADR Mode.
Options available: Enable/Disable. Default setting is

Disable

ADR Data Save Mode

Specifies the Data Save Mode for ADR. Batterybacked or Type 01

NVDIMM.

Options available: Disable, Batterybacked DIMMs, NVDIMMs.
Default setting is

NVDIMMs

Erase-ARM NVDIMMs

Enable/Disable Erasing and Arming NVDIMMs.
Options available: Enable/Disable. Default setting is

Enable

Restore NVDIMMs

Enable/Disable Automatic restoring of NVDIMMs.
Options available: Enable/Disable. Default setting is

Enable

Summary of Contents for G241-G40






















































































































Search results

Summary of Contents for G241-G40

Reviews:

Related manuals for G241-G40

Brands by name

Popular brands

Gigabyte G241-G40, User Manual

Search results

Summary of Contents for G241-G40

Reviews:

Related manuals for G241-G40

Brands by name

Popular brands