Gigabyte G241-G40 User Manual Download Page 50

Page: 50 / 117

BIOS Setup

- 50 -



Main

This setup page includes all the items of the standard compatible BIOS.



Advanced

This setup page includes all the items of AMI BIOS special enhanced features.

(ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)



Chipset

This setup page includes all the submenu options for configuring the functions of the Platform Controller

Hub.



Server Management

Server additional features enabled/disabled setup menus.



Security

Change, set, or disable supervisor and user password. Configuration supervisor password allows you to

restrict access to the system and BIOS Setup.

A supervisor password allows you to make changes in BIOS Setup.

A user password only allows you to view the BIOS settings but not to make changes.



Boot

This setup page provides items for configuration of the boot sequence.



Save & Exit

Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing
<F10> can also carry out this task.)

Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation
message will exit BIOS Setup. (Pressing <Esc> can also carry out this task.)

Summary of Contents for G241-G40






















































































































Search results

Summary of Contents for G241-G40

Reviews:

Related manuals for G241-G40

Brands by name

Popular brands

Gigabyte G241-G40, User Manual

Search results

Summary of Contents for G241-G40

Reviews:

Related manuals for G241-G40

Brands by name

Popular brands