17
Getting Started
screen twice to access the On-Screen
Dialing Keypad.
＊
Key:
⊙
At the on-screen dialing keypardkeypad
double tap and + (international long
distance) will appear, press
to select
city.
＃
Key:
⊙
At the on-screen dialing keypad, hold
down this key to switch to vibration
mode.
⊙
Press this button twice to use key to
change display to P. This is to enter
the extension number.
⊙
At the on-screen dialing keypad press
# key + 4 digit Invisible Code + # key
again to enter Invisible Folders.
Installing and Removing SIM Card
Before installing or removing the SIM card,
please 1) ensure the Phone has been
turned off before 2) remove the battery.
Please make sure you only perform this
operation when the Phone is turned off to
avoid damaging the SIM card.
Installation
[1]
Find the correct location of the SIM
card slot. After removing the battery
cover, it is in the top right. Make
sure the SIM card’s missing corner
is at the lower right corner. With the
chip facing downwards, slide the SIM
card into the slot from below and
push it to the end.
[2]
Match the battery’s metal contacts
to the metallic nodes at the top of
the phone (below the camera lens),
then press down lightly to secure the
battery to the mobile phone socket.
[3]
Clip the battery to the catch.
Removal
Push the SIM card out downwards from its
slot.
Installing and Removing Mini SD Card
This Phone’s memory card slot is
especially designed for Mini SD. Before
use, you should hold the expansion SD
card included in the bundle, and then take
hold of the Mini SD by its tail and pull it
lightly out upwards. This Mini SD card can
be used in the memory slot on the right
side of the Phone.
Note: The Mini SD logo should face
upwards.
Charging the Battery
When the power level of the battery is low,
it will display the “Battery Low” message
and automatically shut down when the
battery has been exhausted.
Precautions before Charging Battery
[1]
Make sure the battery has been fully
charged before first use.
[2]
Please use original batteries and
c h a r g e r s m a d e b y G i g a - B y t e
Communications.
[3]
This product can be charged whether
turned on or turned off.
Preparing for Charging
[1]
Open the rubber cap of the charging
port at the base of the Phone, then
insert the charger connector into the
charging port.
[2]
Make sure the connection between
the charging port and the charging
connector is secure. Make sure the
Summary of Contents for g-YoYo
Page 1: ......
