manualshive.com logo in svg

Gigabyte AirCruiser GN-BR30N-RH, User Manual, Page: 31 / 85

Share
Download
Gigabyte AirCruiser GN-BR30N-RH User Manual Download Page 31

GN-BR30N-RH 2.4GHz AirCruiser N300 Wireless Router

 

25 

•

 DNS 

Domain 

Name

 

•

 

WAN IP Address

 

•

 WAN 

Subnet 

Mask

 

 

Enter the information provided by your ISP for each of your Global IP’s, then 
click next to proceed to enter additional IP’s. 

 

 
 
The WAN Settings Tab - WAN Multi-Session Select 
 

The WAN Multi-Session Select Tab displays the settings of the 

Main Session 

and 

Backup Session

. 

 

 

 
Select a WAN connection type for the Main Session from the drop-down menu 
and select Backup Session type. The Backup Session will become active if the 
Main Session fails to establish a connection to the Internet. 
 
In the event that neither the Main Session nor the Backup Session can 
successfully establish a connection with your ISP, the following process will 
apply: 
 
Automatic: Main -> Backup, Main -> Backup (repeat) Attempts to establish 
connection is repeated until successful. 
 
Manual: Main -> Backup (Backup Session attempts only once) 
 

   

The Backup Session can have a specific LAN type connection assigned. 

Summary of Contents for AirCruiser GN-BR30N-RH






















































































Reviews:

No comments