manualshive.com logo in svg

Gigabyte AirCruiser GN-BR30N-RH, User Manual, Page: 29 / 85

Share
Download
Gigabyte AirCruiser GN-BR30N-RH User Manual Download Page 29

GN-BR30N-RH 2.4GHz AirCruiser N300 Wireless Router

 

23 

Connection 

Automatic

 

When the GN-BR30N-RH is powered on, it automatically 
establishes a connection with the network. If the link becomes 
disconnected for any reason, the GN-BR30N-RH will re-connect 
automatically. 

 
Manual

 

When you click “connection”, the system will establish a connection 
to the network. If the link becomes disconnected for any reason, 
the GN-BR30N-RH will 

not

 re-connect automatically. 

 

Dial on Demand 
 

Enable

 

When there is no Internet activity for a period, the WAN connection 
will automatically end. If a browser is launched again, the 
GN-BR30N-RH will automatically connect to Internet. 

 
Disable

   

When there is no Internet activity for a period, the WAN connection 
will automatically end. If a browser is launched again, the 
GN-BR30N-RH will 

not

 automatically connect to Internet. 

 
 
 
 
 

WAN Configuration Tab – Static IP Address 

 

 

 
Your Internet Service Provider will supply you with the following account 
information you will need: 

 

•

 ISP 

Name 

•

 

WAN IP Address 

•

 WAN 

Subnet 

Mask 

•

 WAN 

Gateway 

Summary of Contents for AirCruiser GN-BR30N-RH






















































































Reviews:

No comments