22
En
gl
is
h
4-13-5 Cut a tube into suitable size,
connect one side of the tube with the
first splitter on the 4-way valve (2) and
connect the other side with the outlet of
the chipset water block and fasten with
tube clips.
4-13-6 Before turning on the power,
please make sure all tube clips are
fastened tightly (such as Fig. a/b/c), and
open the valves on the 4-way splitter
valves (such as Fig. d and e).
Fig. a, b and c
Fig. d and e
4-13-7 To complete the liquid cooling
system, after turning on the power, pour
coolant into the tank till 80% full.
Caution: While removing the tubes for
disassembly, please make sure to close
all valves on the 4-way splitter valve,
