10
En
gl
is
h
4-1-6 If a longer power supply is used,
please use the extended power supply
retainer plate and secure with the ex-
tended screws.
4-1-7 If an irregular size power supply is
used which obstructs the product’s slid-
ing through the rear, please install the
power according to the method men-
tioned below. A cross screwdriver will be
needed for this procedure.
4-1-7a
Remove the thumb screws of the
side panels and detach both side
panels.
4-1-7b
Remove the thumb screws of the
power retainer plate at the rear
of the chassis, and remove the
power retainer plate.
4-1-7c Secure the power supply onto
the retainer plate, by using the 4
fixed screws.
4-1-7d
Remove the screws on the top
cover of the chassis, two at the
rear and two on either side of the
chassis.
4-1-7e Remove the top cover after re-
moving the lid to the coolant tank.
