En
glis
h
21
water block are used as examples.
Warning: Please make sure that the PC
Power is turned off prior to installation.
4-13-1 Remove the caps and tube clips
from the 4-way splitter valve. Please
do not switch on the power at this mo-
ment and make sure that the valves are
closed.
4-13-2 Cut a tube into suitable size, con-
nect one side of the tube with the first
splitter on the 4-way splitter valve (1)
and connect the other side to the inlet of
the VGA Blue Eye and fasten with tube
clips.
4-13-3 Cut a tube into suitable size, con-
nect one side of the tube with the sec-
ond splitter on the 4-way splitter valve
(2) and connect the other side with the
outlet of the VGA Blue Eye and fasten
with tube clips.
4-13-4 Cut a tube into suitable size, con-
nect one side of the tube with the sec-
ond splitter on the 4-way splitter valve (1)
and connect the other side with the inlet
of the chipset water block and fasten
with tube clips.
