- 6 -
GH-PCU21-VG
English
Figure 1
Figure 2
Figure 3
Figure 4
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU. The picture on the right shows the three insert
spaces on the cooler bracket where the CPU clips attach.
Figure 2
Place the cooler atop the CPU and insert the indication arrow
side of the cooler in the space between the central jut of the
CPU socket and the edge of the CPU.
Figure 3
Align the three spaces on the cooler with the three clips on the
base of the CPU and then push firmly downwards to lock the
cooler securely in place. A flat-head screwdriver can also be
used to secure the clips in place.
Figure 4
Connect the yellow 3-pin connector wire of the cooler to the
CPU fan connector located on the motherboard.
Clip Installation is now complete.
Attention!! The indication arrow on the cooler must align
with the central CPU clip.
Note: Please refer to page 8 & 9 for power installation
and installation of the fan speed controller.
Installation Instructions for AMD Athlon XP Clip
