2. OPERATION
2-1. Front Panel
Names and functions of the Front Panel switch and LED indicators are as follows:
➁
➂
➃
➀
➀
POWER SWITCH
This switch turns on or turns off the system. Color of this switch is red in the
“Standby” mode, and orange when the system is ready to operate. In case of
shut down, do not turn the BREAKER on the rear panel off, until the
illumination of the POWER SWITCH turns off.
In the power off process, all the set-ups done by the operator are stored in the
non-volatile RAM. These set-ups are reattributed when power is on again.
➁
WARNING INDICATOR
•
HD INPUT :
Lit red when HD-SDI VIDEO signal is not connected to the
HD-SDI IN or the connected signal is abnormal.
•
DC POWER :
Lit red when in3.3VDC or +5VDC is out of the
specified voltage range.
•
FAN :
Lit red
when the cooling fans come to a stop.
➂
HDD INDICATOR
There are three indicators, HDD1, 2 and 3. Blinked orange when the Disks are
in write operation (RECORD). Blinked green when the Disks are in read
operation (PLAY SLOW etc). When one of the Disks is fail, the corresponding
indicator stops blinking and keeps to light red
11
