1. INSTALLATION
Review the “Safety precautions” of this manual before installation of this product.
1-1. Confirmation of Environment
This product operates properly within the temperature range of +0-45
℃
and the
humidity range of 10-90% (Non-condensing). If the temperature of this product is out of
this range due to a transportation or preservation, do not power on until the temperature
reaches the specified range.
To prevent an over-heat, do not disturb the airflow of this product. Keep a certain space
open, at least 5 cm on the front and the rear of this product.
1-2. Assurance of Mains Voltage
Assure that the mains AC voltage to this product is within the range of 90-264V 50/60
Hz.
1-3. Connection of Power Cable and Power ON
The power cable must be connected properly to the AC IN connector on the rear panel.
Switch on the BREAKER on the rear panel (“1” of 1/0 indication shows ON state).
Push the POWER SWITCH on the front panel for more than 1 second.
All fans are rotated, and the system comes into Setup routine. All LEDs are lit during the
Setup routine. After completion of the Setup routine, most of the LEDs go out and come
into a normal state. The color of the POWER SWITCH lights in orange and the system
is ready to operate.
9
