Administration
45
© 2010 GIGA-TMS Inc.
You should also see your TR610 in the list:
That's it! You've successfully connected your TR610 to AggreGate. To proceed from this point, see the
Time and Attendance branch of the AggreGate user guide.
Manual Override: If Automatic Discovery Didn't Work
The "manual" method uses a different approach: We will have the TR610 initiate the connection, and the
LinkServer will wait and listen for it. This is useful in WAN scenarios, when the LinkServer has a stable
and accessible IP while the TR610 is behind a corporate firewall or a NAT router. In other words, only the
TR610 can reach LinkServer, so discovery (the previous method) would not work.
AggreGate configuration:
1. In the System Tree, go to Drivers/Plugins and double-click AggreGate Agent.
2. Note down the Port number to listen for Agents (default is 6480). Make sure no firewall is blocking
this port on the PC running LinkServer.
3. Make sure Automatically register device accounts for new Agents is checked.
TR610 configuration:
Summary of Contents for PROMAG TR610
