GIGA-TMS PROMAG TR610, User Manual

Page: 24 / 69

TR610 User's Manual 24
© 2010 GIGA-TMS Inc.
·
Upload: Upload a file for adding users to the white list in bulk.
·
Clear: Delete the contents of the white list.
·
Device Operations
· Reboot : Restart the terminal so that changes in settings can take effect.
· Initialize settings : Reset the terminal to its default configuration.
· Format disk : Erase all stored data (white list and event log) without affecting settings.
· Log out : For ending the web-based setup session.
· Device status section: Shows current IP address and network information. This is the same
information as appears in the Information Screen on device startup .
Onscreen Information
When a web admin session is in progress, a small H (for HTTP) is displayed at the lower-left corner of
the TR610 screen:
The onscreen setup cannot be used when the web admin is in the middle of a transaction. In that case,
a small "hourglass" icon appears next to the H and the onscreen setup appears frozen (doesn't respond
to user input). As soon as the transaction ends, the hourglass disappears and you can keep using the
terminal normally.
The web admin will not always be available. When the onscreen setup is used and the
user is modifying a setting (i.e, editing a listbox or a textbox), the web admin will not reply
to incoming requests; it will time out, and the TR610 would appear to be unavailable. Once
the user finishes editing the setting, the web admin would become available again. It would
then show an alert saying that another user is currently logged in from a client with higher
priority. Then, when the user exits the onscreen setup completely, the web admin would
become fully available.
3.1.1 Settings
Settings define device operational parameters.
·
General : Set owner/device name, password and display style.
· Network : Configure IP address and other network parameters.
33
34
34
34
35
35
35
36
13
37
25
26