GIGA-TMS AUR720-BXX, User Manual

Page: 86 / 112

86

Select Data box The data of select tag memory. The data presents in hexadecimal format.

Access Password box Types the Access Password used to access the tag memory.

Start Word Address box Types the start address of Write Bank that is going to write to. The address
unit is in Word (1 Word = 2 bytes)
.

Write Data box Types the data written to Write Bank . The data presents in hexadecimal format.

Write button Tap to read the tag memory. The reader will write to the select tag memory.
If you don’t know the memory data you want to select, please select the Select Option list to Disable .
If the write tag result is failed, it could be caused by following reasons:

There is not any tag which memory is matched the select options.

The Access Password box value is not correct. This means the enter Access Password is not same to
one stored in the select tag’s Access Password .

Write Bank memory is locked.

The reading performance is not well. You may adjust the reading distance or move reader and tag to
the place where no metal material nearby.
Write Kill Password
The Kill Password is a 2 Words (4 bytes) data stored in the Reserved Memory . The start address is 0 in
Word .
Following is an example to write a given Access Password (“1234ABCD”) to Reserved Memory .

Write Bank = Reserved

Select Option = Disable

Access Password = 00000000 (depends on current Access Password stored in the tag)

Start Word Address = 0

Start Word Length = 2

Write Data = 1234ABCD
Write Access Password
The Access Password is a 2 Words (4 bytes) data stored in the Reserved Memory . The start address is 2 in
Word .
Following is an example to write a given Access Password (“567890EF”) to Reserved Memory .

Write Bank = Reserved

Select Option = Disable

Access Password = 00000000 (depends on current Access Password stored in the tag)

Start Word Address = 2

Start Word Length = 2

Write Data = 567890EF